The repair of the crusher pallet includes the following three main processes:

1, in the rim on the preparation of the installation of the site;

2, making pallets;

3, the installation of the pallet.crusher parts

Crusher pallet according to its installation is not adjusted for the better, then take it down in accordance with the model cut teeth.

The pallet is fixed with four screws of 10 to 12 mm in diameter and two bolts of 18 to 20 mm in diameter.

Bolt holes and screw holes should be in the pallet with a good hole in the drill and the mouth.

With a crusher pallet can repair three of the following has been the collapse of the adjacent teeth. In the case of more broken teeth, a row can be two or more pieces of the pallet.

When using this method to repair the teeth, the rim of the weakened Chengdu is not large. If the pallet is broken or worn, it can be replaced by a new one.

The possibility of applying any of the repair methods is determined by the following factors: the material of the gears, the construction of the gears, the conditions of use of the gears, and the total number of existing equipment in the repair shop.

When the first two methods are used to repair the steel crusher gear, satisfactory results can be obtained.

The removable steel pallet has no significant drawbacks, so it is best to repair the crusher teeth with a removable steel crusher pallet regardless of the material of the crusher gear and the conditions of use.