How can the working efficiency of the crusher be maximized? The following are some suggestions made by Sichuan Bozheng Machinery Manufacturing Co., Ltd.:

1, the use of crusher process, check the crushing machine V-belt tightness and wear, such as too tight too loose, or serious wear and tear, should be timely adjustment or replacement of the belt.jaw plate

2, according to the process requirements of the block, adjust the opening size of the palate plate.

3, in the use of crusher process, pay attention to the situation of the material, if blocked, to clear in time.

4, the equipment is running normally after the air is allowed to feed broken. Feeding to be uniform, not allowed to join other pieces.

5, hand moving the flywheel or pull the belt, to confirm the flexibility of the equipment in order to load the test.

6, before parking, the palate should be between the pieces of all broken before they can stop.

7, if there is no protective cover, or the shield is not perfect, you can not drive, so as to avoid personal accident.

8, check the two sides of the plate wear, such as serious wear and tear, should be replaced.

9, in the use of crusher, we must comply with crusher operating procedures.